LEXICON ALPHA | 2X2X2 DESKTOP RECORDING STUDIO

DSP LOTUS DX1500



Thiết kế mạch mới, đáp ứng tần số rộng, CPU tốc độ cao, xử lý rõ ràng hơn. Mỗi kênh đều có chức năng cài đặt Delay, để cài đặt âm thanh phù hợp cho mọi kích thước phòng và vị trí đặt loa.


Cài đặt âm thanh chuyên nghiệp thông qua phần mềm cài đặt âm thanh trên máy tính.



Bộ giải mã 5.1, cài đặt 2 kênh micro độc lập, EQ điều chỉnh các dải tần số; chức năng quản lý loa, kênh chính, loa siêu trầm, trung tâm và vòm có thể được thiết lập độc lập. Điều chỉnh nhạc với PEQ 15 băng tần, micrô với PEQ 20 băng tần.



Echo/Reverb với 7 băng tần PEQ; Tích hợp 4 cấp độ chống hú (anti-feedback ) với tính năng chống hú thế hệ mới. Kiểm soát độc lập tiếng vang và Echo cho 2 micro riêng biệt.


Đầu ra ghi âm, dữ liệu đầu ra có thể được thiết lập độc lập. Cài đặt mật khẩu để quản lý và bảo vệ các chương trình trong máy.



Cổng kết nối máy tính: Cổng kết nối USB, kết nối với máy tính qua wifi. Hỗ trợ lưu và gửi dữ liệu, dễ vận hành.



Sản phẩm sử dụng hoàn hảo trong các dàn karaoke gia đình, dàn karaoke kinh doanh hay các phòng hội trường, sân khấu chuyên nghiệp.

JBL KX-100 Vừa là một Mixer+professor vừa là preampli với đầy đủ các tính năng.
Đặc biệt sản phẩm thiết kế chuyên cho Karaoke giúp người dùng dễ dàng kết nối vào ampli của hệ thống âm thanh gia đình.
KX-100 là sự kết hợp của những sản phẩm chuyên dụng của hãng dbx và Lexicon được lựa chọn bởi nhiều ca sĩ trên thế giới.

MARANI DPA240P là hệ thống quản lý loa kỹ thuật số 2-IN / 4-OUT hiệu quả về chi phí. Được thiết kế để phục vụ cho bất kỳ cấu hình crossover nào, nó cung cấp sự xử lý và kiểm soát phù hợp để sử dụng ứng dụng trực tiếp. Nó cung cấp 2 đầu vào tương tự, và 4 đầu ra tương tự, được quản lý bởi một động cơ MARANI® DSP mạnh mẽ, ngoài bộ chuyển đổi 24 bit AD / DA. Mỗi kênh đầu vào cung cấp lựa chọn EQ với bộ lọc Parametric 11 dải, kiểm soát độ lợi, tăng cường động, chức năng cổng tiếng ồn, máy nén RMS, bộ phát tiếng ồn trắng / hồng bên trong và độ trễ cấu hình. Mỗi đầu ra cung cấp lên đến 7-band của cân bằng tham số trong các bộ lọc chéo mà mình cung cấp dốc từ 6dB / Octave lên đến 48dB / Octave. Mỗi đường dẫn đầu ra cũng có tính năng giới hạn cao điểm hoặc bộ lọc RMS Compressor có thể chọn, bộ lọc Dynamic Loudness (chỉ đầu ra 1,3) và độ trễ liên kết trình điều khiển.

Các DPA240P hỗ trợ một ma trận đầy đủ chế độ mà đầu vào có thể được chuyển / hỗn hợp trong bất kỳ tỷ lệ cho bất kỳ đầu ra trộn. Để cấu hình và điều khiển từ xa, DPA240P có thể được kết nối thông qua kết nối USB hoặc RS485. Phần mềm điều khiển từ xa cho phép điều khiển đồng thời lên đến 32 thiết bị, thiết lập tất cả các thông số và hiển thị các mức thời gian thực.

Stereo Reverb/Effects Processor

Reverb and Effects Processor

10 Input/12 Output FireWire Audio Interface

8-Input USB 2.0 Desktop Recording Studio

Lexicon I-ONIX U42S | 4-Input USB 2.0 Desktop Recording Studio
4-Input USB 2.0 Desktop Recording Studio

Lexicon I-ONIX U22 | 2-Input USB 2.0 Desktop Recording Studio
2-Input USB 2.0 Desktop Recording Studio

Lexicon Omega OSB Desktop Audio Interface/Mic Bundle

8x4x2 Desktop Recording Studio

4x2x2 Desktop Recording Studio

4-in/4-out Reverb/Effects Processor with USB "Hardware Plug-In"

Stereo Reverb/Effects Processor with USB "Hardware Plug-In" Capa

TWO PROCESSORS. TWO UNIQUE APPLICATIONS. ONE RACK SPACE. 32 LEGENDARY LEXICON� EFFECTS. ENDLESS POSSIBILITIES.
Whether you're looking for raw processing power with instant front-panel access for live performance, or seeking rich, smooth and complex processing algorithms in the studio, Lexicon� brings the best of both worlds together in the MX200 Dual Reverb/Effects Processor. Designed with both live sound reinforcement and home recording in mind, MX200 features the deep, rich reverb and effects algorithms that built the Lexicon legend, and adds increased versatility with specialty effects and dbx� dynamics. Each of the 32 stunning reverbs and effects � and their parameters � are all instantly accessible within a single button push or knob turn on the intelligently designed front panel without wading through bank after bank of tedious menus. Add powerful Editor/Librarian and VST� / Audio Units software, and bring 35 years of Lexicon heritage to your desktop.

MX200 Lexicon đã cung cấp khả năng sáng tạo để tích hợp với một máy chủ sequencer giống như một hiệu ứng plug-in. Các MX400 cập nhật đi một tốt hơn - nó làm tất cả điều đó, nhưng với động cơ hiệu ứng xử lý dual quá.

Designed to provide incredible flexibility, sonic excellence and intuitive control for performance applications, the DriveRack® 4800 is the new flagship of the hugely successful DriveRack family. From the powerful 96 kHz DSP engine and standard analog and digital I/O, to the QVGA display and multiple control surfaces, the 4800 provides all the processing, flexibility and control necessary for both installation and live use. The menu-based set-up procedure includes selectable DSP inserts on all inputs and outputs including classic dbx compression, limiting and advanced feedback suppression (AFS) among others.
The DriveRack 4800 is the next generation of the famous DriveRack family, and like its predecessor it is engineered to provide "Everything you need between the mixer and the power amps". In keeping with this philosophy the 4800 includes four inputs and eight outputs with both analog and digital connectivity. The 96 kHz processing engine is capable of offering insert processing functions to customize the processing path for your application, in addition to the standard system processing functions all with extremely low latency and extended frequency response. From Signal Routing, EQ, and Bandpass Filters, to classic dbx® Dynamics and Feedback Suppression all the processing is available and with the sonic excellence that you would expect from the world's leading system processing manufacturer. With all this processing power available, control is of paramount importance. The DriveRack provides a full color display to speed manual operation; this combined with intuitive front panel controls, an easy to use GUI and optional wall panel controllers means that whether your application is tour sound or installation, the DriveRack 4800 has what it takes.
48 and 96 kHz operation
Color QVGA Display
4 analog and AES/EBU inputs
8 analog and AES/EBU outputs
Optional Jensen® I/O Transformers
Full Bandpass Filter, Crossover and Routing Configurations with Bessel, Butterworth, and Linkwitz-Riley filters
31-Band Graphic and 9-band Parametric EQ on every input
6-band Parametric EQ on every output
Loudspeaker Cluster and driver Alignment Delays
Selectable DSP inserts on all inputs and outputs including Classic dbx Compression, Limiting and Advanced Feedback Suppression among others
Ethernet HiQnet™ networking control
dbx ZC wall panel control

There is a reason that Tour Sound Professionals and discriminating Audio Contractors choose dbx® DriveRack® products for their high-end tours and installs. The DriveRack products provide the tools that ensure that the system sounds its very best. With the introduction of the new 260, the heritage of unrivaled system/loudspeaker control continues. The 260 capitalizes on the road tested and contractor approved nature of the other products in the DriveRack line. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression (AFS™).

The DriveRack 260 continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack 260 was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus® limiters (to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system and complete DriveWare™ GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.
Feedback Elimination
2.7 Seconds of Alignment and Zone Delay
RS-232 PC GUI control
Classic dbx Compression and Limiting
Graphic and Parametric EQ
Auto-EQ Function
Full Bandpass, Crossover, and Routing Configurations
Auto Gain Control
Pink Noise Generator and fulltime RTA
Setup Wizard with JBL speaker and Crown Power Amplifier Tunings
Security Lockout
Wall Panel Control Inputs

Powered speakers are a beautiful thing. Everything you need bundled into one simple, tidy, portable package. Just grab ‘em and go, right? Well, you may think your powered speaker system is complete, but you’re missing half the picture. DriveRack PX is the other half. In another dbx industry first, we’ve created a processor specifically tailored for powered speakers. Utilizing our highly-acclaimed DriveRack technology, the PX picks up where your powered speakers leave off.

The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Our patented Advanced Feedback Suppression (AFS™) kills nasty feedback, allowing problem-free operation at higher sound levels, while our patented Subharmonic Synthesizer™ extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by our graceful PeakPlus™ limiting. Your ears, your audience, and your powered speakers will forever thank you.
In spite of all that sophistication, rest assured we won’t overcomplicate the simplicity of your rig. Our exclusive Setup, Auto-EQ, and AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.
Stereo Feedback Elimination with 12 feedback notch filters

Why just rock the house when you can rattle the foundation loose. The wildy popular beat of "House Music" is likely to be driven by the throbbing, low-end bass of dbx® Subharmonic Synthesizers in clubs around the world. For decades, the patented dbx Subharmonic Synthesis has been the secret weapon used by mobile DJ's and film and sound professionals to produce an impact unavailable from any other device unique because the dbx process actually produces a new, Waveform Modeled bass note, exactly an octave below the bass in the original audio. The dbx 120A Subharmonic Synthesizer with Modeled Waveform Synthesis has been specially optimized by dbx engineers for the needs of audio professionals. Its two separate bands of bass synthesis provide the best combination of smoothness and control, and the independent Low Frequency Boost circuit is designed to get the most out of high-performance low frequency speaker systems.

Flexible system interfacing is achieved by providing both 1/4î and RCA input connectors, along with main outputs which can be full range (including synthesis) or high frequency only, along with a separate subwoofer output with its own level control.

The 120A's patented subharmonic synthesis process actually builds the synthesized waveform using the waveshape of the original bass material. Unlike other attempts at bass synthesis, the dbx process produces smooth, musical low frequencies that don't interfere with mid and high-band information, even when maximum synthesis and boost are applied. The result is a low-end punch that people really feel, even at system levels that won't destroy sound equipment or damage hearing.

Individual control for two ranges of subharmonic frequencies
Separate Low Frequency Boost Circuit
Separate Subwoofer Output
1/4" Balanced inputs and outputs
RCA Input Connectors
Front panel LEDs that show crossover status and synthesis activity
Patented circuitry ensures that mid and high frequencies are not affected
Built-in crossover with choice of 80Hz or 120Hz crossover point
Enhance bass audio material for use in a veriety of professional applications such as:
Nightclub and dance mixing
DJ Mixing